Hi, I’m Pat and have worked Tiffany designs for a few years and am now adding Marquetry to my interests

My Latest Posts

• • •

• Fiona’s Tulip Lamp (Off the Mould)août 27, 2026
  The bottom ring has been delivered and I have been able to de-mould the lamp and to temporarily place it on an existing base to get an idea of the … Continuer à lire … « Fiona’s Tulip Lamp (Off the Mould) »
• Fiona’s Tulip Lamp (All glass pieces on the mould )août 23, 2026
  There we go, all parts on the mould and the upper ring integrated, just waiting for the lower ring, otherwise I’ll just use some braid. Can’t wait to see the … Continuer à lire … « Fiona’s Tulip Lamp (All glass pieces on the mould ) »
• Le Galludec Marquetrie : L’oiseau (4)août 23, 2026
  À la fin de l’année scolaire je n’avais pas encore terminé l’oiseau, mais voici le travail, à reprendre en septembre.
• Fiona’s Tulip Lamp (On the Mould )août 9, 2026
  What with the holidays on such it’s been a while since I’ve updated on this project. So, here without upper and lower rings and without cleaning, here is the lamp … Continuer à lire … « Fiona’s Tulip Lamp (On the Mould ) »
• The Lantern finished (6)juillet 10, 2026
  The lantern assembled onto the base, and made of veneer coated chipboard is at last finished. Not really sure that the glass design is really exciting, but the aim was … Continuer à lire … « The Lantern finished (6) »
• The Lantern (5)juin 28, 2026
  The lantern backlit with a portable workshop lamp Just to get an idea
• The Lantern (4)juin 28, 2026
  With a white glue interface I firstly coated the top and bottom of the chipboard with a beech veneer and put in under a press. I then removed the excess … Continuer à lire … « The Lantern (4) »
• Copper crown receivedjuin 27, 2026
  After many weeks waiting my copper plated crown for the Wisteria lamp has finally been delivered. The crown will eventually have a verdigris patinated finish and the branches will be … Continuer à lire … « Copper crown received »
• The Lantern (3)Mai 29, 2026
  As the aim is to make this relatively cheap, the base will be made of 2 chip boards, glued together to give the desired thickness. And in order to add … Continuer à lire … « The Lantern (3) »
• The Lantern (2)Mai 27, 2026
  This is very much an exercise for me, so I went for a simple form based on an already existing pattern For the remainder of the lantern I used glass … Continuer à lire … « The Lantern (2) »

• • •